Hypalon RIB tube repairs at our Yeovil workshop for leisure, commercial, rescue and military RIBs. Boats from across the UK.
Tubes past repair? See RIB retube. Doing a small repair yourself? See the RIB repair guide.
Ribcollar repairs Hypalon RIB tubes, collars and fittings at our workshop in Yeovil, Somerset. We work on leisure, commercial, rescue and military RIBs, and we take boats from across the UK.
Every repair starts with an honest view of whether the tube is worth repairing or whether a retube is the better spend. Send photos of the damage and we will quote the actual job.
A repair is the right answer when the tube fabric is sound and the problem is local: a puncture, a lifting patch, a leaking valve, a torn handle or a worn rubbing strake. Hypalon stays repairable for its whole service life, so a sound Hypalon tube with a puncture is almost always a repair job.
A retube is usually the better spend when the coating has worn through, seams are failing in several places, or the tube is an ageing PVC or PU tube that will no longer take a reliable bond. We repair Hypalon tubes only, and we will tell you before you commit if the tube is past repair. See RIB retube if your tubes are at that stage.
For small repairs you plan to do yourself, see our RIB repair guide.
We repair and replace RIB collars and sponsons in Orca Hypalon. Where the collar is sound, we repair punctures, tears, leaking seams and worn areas. Where the fabric has gone, we replace the individual sponson or the whole collar, whichever the boat needs. Every repair is bonded with Bostik NE486 and pressure tested before it goes back. See a recent example in our rescue craft repair case study.
Can a damaged tube be repaired instead of retubed?
Often yes, if the tube fabric is still sound and the damage is local. Where it is not, we will advise a retube instead.
What repairs do you carry out?
Punctures, seams, valves, handles, rubbing strakes, wear patches, signwriting, collar sections and SIB refurbishment. We repair Hypalon tubes only.
Can you repair a PVC or PU tube?
No. Ageing PVC and PU tubes rarely take a reliable bond, so we assess them for a retube in Orca Hypalon instead.
How much does a RIB repair cost?
Repairs are quoted per job from your photos. For the cost of a full retube by boat length, see our RIB retube cost guide.
Do you work on commercial and rescue RIBs?
Yes. We repair leisure, commercial, professional, military and rescue RIBs.
Where is the work done?
At our workshop in Yeovil, Somerset. We take boats from across the UK.
How do I get a repair assessment?
Send clear photos, the boat details and a short note on the problem. We will review it and tell you the right route.
Send clear photos of the damaged areas, the boat make and model, overall length and a short note on the issue. Ribcollar will review the likely scope and advise whether repair, partial replacement or retubing is the right route.